Cybertruck DIY Color Wrap Film - TPU Precut Wrap Kits

Package List:

• Complete set of Cybertruck DIY Color Change Wrap Kit
• Practice Pieces Kit 
• Scraper Kit
• Car Wash Mitt
• Car Drying Towel
• Magnetic Mount
• Heat Gun

Installation:

Preparation:

• Wash your Tesla Cybertruck thoroughly with car soap and water.
  Ensure the surface is free of dirt, dust, and any other contaminants.
• Dry the vehicle completely with a clean microfiber towel.

• Wipe down the specific area where you will be applying the PPF with isopropyl alcohol or automotive cleaner.
• This will ensure no residues or oils interfere with the film's adhesion.

Application:

• Unroll the pre-cut PPF pieces on a clean, flat surface.
• Identify each piece based on the installation instructions in your kit.
• The pieces are usually labeled for specific areas of the vehicle.

• Spray the Surface:

• Peel and Position the Film:

• Use a squeegee or application tool to gently press the film onto the vehicle. Start from the center and work outward to remove any air bubbles and excess water.
• Be gentle to avoid stretching or damaging the film.

• Use a heat gun or hairdryer to apply mild heat to the film. This will make it more pliable and help it conform to the vehicle's curves and edges.
• Gently stretch and mold the film as needed to fit the contours of the vehicle. Avoid overheating, as it can cause damage to the film.

• Use a sharp blade or utility knife to trim any excess film along the edges for a precise fit, taking care not to scratch the vehicle's paint.
• Smooth out any remaining bubbles or wrinkles with the squeegee.

• Wipe down the edges and surrounding areas with a clean microfiber cloth to remove any soapy residue and ensure a clean finish.

Post-Installation Care:

• Let the PPF set for at least 24 hours without exposure to water or harsh conditions. This allows the adhesive to fully bond with the vehicle's surface.

• Do not wash the vehicle for at least 48 hours after installation to prevent disturbing the film during the curing process.

• Clean the PPF with a mild car soap and water solution. Avoid abrasive cleaners or tools that might damage the film.
• Regularly check the edges of the film to ensure they are secure and free of debris.

Tips:

• Work in a Clean Environment: Ensure a dust-free environment to avoid debris getting trapped under the film.
• Be Patient: Take your time with each step, especially during the alignment and squeegeeing process.
• Seek Assistance: If you find it challenging to apply the film on your own, consider enlisting the help of a friend or a professional installer.

FAQ: